It is hard to believe that it was almost ten years ago I witnessed a CNC router in action for the very first time. I was fascinated and simply had to have one! Although I had been in the creative end of the three dimensional sign business for most of my life I didn't really know what I would do with one of these machines - but I just knew it could do fantastic stuff.

Along with the CNC router I discovered the wonderful material called Precision Board and the glues, primers and other companion products they offer. Since then we have gone through many tons of the material using it in most signs and projects we tackle. This journal will chronicle our many adventures both past, present and future. I'll talk from the perspective of someone who pushes these products to the creative limit on a daily basis. I'll be adding to the stories two or three times each week. -dan

Thursday, November 1, 2012

Splash of color!

Since the last post about the Sunshine Homes sign we've made great progress. The last of the welding was finished and the diamond mesh was all tied to the frame. The sign was looking pretty big and took a lot of real estate in the shop by this time. It was a long walk around it to get from one side of the work space to the other.

Troweling on the fiberglass-reinforced-concrete and then carving it meant we were in for a long day.  The thing about sculpting concrete is that once you begin you have to go until you are done. Concrete waits for no one.

Today, while he concrete began to cure we began painting the top routed portions of the sign that were routed from 30 lb Precision Board. The sign sure brightened up in a hurry.

We'll be working on the top portion of the sign ver the next few days, adding more base coats and then final blended coats of paint to make the sun really pop. Lastly, we'll add the paint to the rock work.