It is hard to believe that it was almost ten years ago I witnessed a CNC router in action for the very first time. I was fascinated and simply had to have one! Although I had been in the creative end of the three dimensional sign business for most of my life I didn't really know what I would do with one of these machines - but I just knew it could do fantastic stuff.

Along with the CNC router I discovered the wonderful material called Precision Board and the glues, primers and other companion products they offer. Since then we have gone through many tons of the material using it in most signs and projects we tackle. This journal will chronicle our many adventures both past, present and future. I'll talk from the perspective of someone who pushes these products to the creative limit on a daily basis. I'll be adding to the stories two or three times each week. -dan

Tuesday, September 20, 2011

Instant ancient vine (frame work)

Work continues on many fronts on the Fox & Hounds pub project. Today the outside entry received the final coats of base paint, leaving the glazes to be done tomorrow. In the ladies washroom the last of the welded rusty steel stall dividers was installed today. With the bulk of the welding done it was time to do one last task before that equipment goes home once more at long last. The primary task fo today was to weld up the framework for the thick vines. 

It is my bet that at least one person will lean on, swing or climb on the vine in the next years. That means it needs to be sturdy. REAL STURDY. Anchor points were drilled into the floor to anchor the base. I bent and positioned a single rod for each vine from the ground, then screwed in heavy lag bolts at key points ensuring the vines will grow for many years to come. The vines intertwine around the brick post and wander up to the beam above, then down towards the beer dispenser below. A video screen will be mounted to the end, positioned perfectly for reference of the bar tender to access.

The next step will be to wrap the welded armature with diamond lath and then using sculpting epoxy to form the weathered and twisted grape vine. Stay tuned for progress.